Specification:

Code: S10-45×45
Slot Width: 10.2 mm
Weight: 2.15 kg/m
Mass of Inertia: lx: 15.12 cm⁴ ly: 15.12 cm⁴
Section Modulus: zx: 6.52 cm³ zy: 6.52 cm³

Summary:

Order No: HY-S10-4545, T-slot height: 12.3 mm, Section size: 45 mm × 45 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 2.5 mm. Wall Thickness: 1.8 mm

4545 profile’s T-slot width is 10.2 mm, it usually applies to assembling high load bearing of structural frameworks because of high tensile stress. Simple and generous appearance is welcomed proverbially.

It often matches with M12 bolt (L=30 mm) of hexagon socket head and T-nut. If it needs to bear high strength, please use M10 bolt to connect with the sliding nut so that the framework much stronger and reliable. It also can adopt different screw & nut to fix according to the different stress intensity.

All 45 series T-slot aluminium extrusion profile can freely connect with each other.

Specification:

Code: S10-45×45L
Slot Width: 10.2 mm
Weight: 1.67 kg/m
Mass of Inertia: lx: 13.68 cm⁴   ly: 13.68 cm⁴
Section Modulus: zx: 5.90 cm³   zy: 5.90 cm³

Summary:

Order No: HY-S10-4545L, T-slot height: 12.3 mm, Section size: 45 mm × 45 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 2.5 mm. Wall Thickness: 1.5 mm

The main difference between 4545L and 4545 profiles is the wall thickness which determined 4545L profile lighter load bearing. The fit is correct, so we will provide you the best solution and reasonable suggestion according to your actual application and force/stress analysis based on frame structure.

M10 bolt or screw & nut are available. All 45 series T-slot aluminium extrusion profile can freely connect with each other.

Specification:

Code: S10-45×45R
Slot Width: 10.2 mm
Weight: 1.80 kg/m
Mass of Inertia: lx: 11.33 cm⁴   ly: 11.33 cm⁴
Section Modulus: zx: 4.50 cm³   zy: 4.50 cm³

Summary:

Order No: HY-S10-4545R, T-slot height: 12.3 mm, Section size: 45 mm × 45 mm, R=45°, Hole: φ10.2 mm, Thickness of diagonal bar: 3.0 mm. Wall Thickness: 2.2 mm

4545R profile is heavy-duty because of thickness. Curved edge provides neat and finished appearance. It’s usually to be connected with three profiles using three-dimensional angle matching accessories sunken screw and nut. The ends of profile need to be tapping. The slot is 10.2 mm, M10 T-bolt and flange nut could be selected to connect with other profiles.

Specification:

Code: S10-45×45RQ
Slot Width: 10.2 mm
Weight: 1.80 kg/m
Mass of Inertia: lx: 12.25 cm⁴   ly: 12.25 cm⁴
Section Modulus: zx: 5.06 cm³   zy: 5.06 cm³

Summary:

Order No: HY-S10-4545RQ, T-slot height: 12.3 mm, Section size: 45 mm × 45 mm, R=37.5°, Hole: φ10.2 mm, Thickness of diagonal bar: 3.0 mm. Wall Thickness: 2.2 mm

4545RQ profile almost the same with 4545R has heavy-duty because of thickness. Curved surfaces are ideal for following machine or space contours. It’s usually to be connected with three profiles using three-dimensional angle matching accessories sunken screw and nut. The ends of profile need to be tapping. The slot is 10.2 mm, M10 T-bolt and flange nut could be selected to connect with other profiles.

The difference between 4545RQ and 4545R is cross-section.

Specification:

Code: S10-45×45W
Slot Width: 10.2 mm
Weight: 2.46 kg/m
Mass of Inertia: lx: 15.82 cm⁴   ly: 15.82 cm⁴
Section Modulus: zx: 6.95 cm³   zy: 6.95 cm³

Summary:

Order No: HY-S10-4545W, T-slot height: 12.3 mm, Section size: 45 mm × 45 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 4.4 mm. Wall Thickness: 2.2 mm

4545W profile is heavy-duty from the image of the section size and thickness. It usually applied to produce countertops, assembly-line, shelves, and all kinds of the framework in a wide range.

Refer to bolt & nut; it usually adopts gusset element compound used in order to reinforce and fasten the frame structure.

Specification:

Code: S10-45×60
Slot Width: 10.2 mm
Weight: 2.65 kg/m
Mass of Inertia: lx: 26.72 cm⁴   ly: 16.01 cm⁴
Section Modulus: zx: 9.51 cm³   zy: 7.58 cm³

Summary:

Order No: HY-S10-4560, T-slot height: 12.3 mm, Section size: 45 mm × 60 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 2.0 mm. Wall Thickness: 2.0 mm

4560 profile is heavy loads with maximum stability; General purpose, the medium-duty profile for strong, rugged performance; it has a 10 mm slot that allows a maximum slot nut thread of M10, it used for a vast range of applications from machine frame building to guarding, from special enclosures to vehicle structures.

Specification:

Code: S10-45×60W
Slot Width: 10.2 mm
Weight: 2.90 kg/m
Mass of Inertia: lx: 30.09 cm⁴   ly: 17.79 cm⁴
Section Modulus: zx: 10.69 cm³   zy: 8.39 cm³

Summary:

Order No: HY-S10-4560W, T-slot height: 12.3 mm, Section size: 45 mm × 60 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 2.2 mm. Wall Thickness: 2.2 mm

4560W profile is heavy loads with maximum stability, general purpose, the medium-duty profile for strong, rugged performance; it usually used for medium and large-sized frameworks such as fixtures, guarding enclosures, factory equipment, and furniture; it has a 10 mm slot. The outer sizes and slot spacing are based on generic 45 mm and 60 mm dimensions as shown. The central aluminium extrusion hole can be directly tapped M10. A wide range of connecting and other parts is available for the slot 10 aluminium profiles.

Specification:

Code: S10-45×90
Slot Width: 10.2 mm
Weight: 3.80 kg/m
Mass of Inertia: lx: 100.17 cm⁴   ly: 26.27 cm⁴
Section Modulus: zx: 22.26 cm³   zy: 11,67 cm³

Summary:

Order No: HY-S10-4590, T-slot height: 12.3 mm, Section size: 45 mm × 90 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 2.0 mm. Wall Thickness: 4.0 mm

4590 profile with heavy loads is maximum stability due to high tension and strength, T-slot is 10 mm, it usually used for safety-guarding, testing and inspection services to workbenches, machine-frames and linear systems.

There are three types of option: 4590, 4590L and 4590W profiles. All 45 series T-slot aluminium extrusion profile can freely connect with each other.

Specification:

Code: S10-45×90L
Slot Width: 10.2 mm
Weight: 3.30 kg/m
Mass of Inertia: lx: 93.20 cm⁴   ly: 23.70 cm⁴
Section Modulus: zx: 21.60 cm³   zy: 10.80 cm³

Summary:

Order No: HY-S10-4590L, T-slot height: 12.3 mm, Section size: 45 mm × 90 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 1.9 mm. Wall Thickness: 1.5 mm

4590L profile’s thickness is less than 4590, the fastener and accessories are common with 40 series (slot 10), it usually used for safety-guarding, testing and inspection services to workbenches, machine-frames and linear systems.

How to select the right one among 4590, 4590L and 4590W profiles, please email us. 45 series T-slot aluminium extrusion profile can freely connect with each other.

Specification:

Code: S10-45×90W
Slot Width: 10.2 mm
Weight: 4.45 kg/m
Mass of Inertia: lx: 112.10 cm⁴   ly: 29.70 cm⁴
Section Modulus: zx: 24.60 cm³   zy: 12.30 cm³

Summary:

Order No: HY-S10-4590W, T-slot height: 12.3 mm, Section size: 45 mm × 90 mm, Hole: φ10.2 mm, Thickness of diagonal bar: 5.0 mm. Wall Thickness: 3.0 mm

4590W profile’s thickness is maximizing in 45 series, so it is the heavy-duty profile for strong, rugged performance. Center channel can be used as an air manifold. The accessories gusset element is usually been chosen to make the system more stable. It usually used for safety-guarding, testing and inspection services to workbenches, machine-frames and linear systems.

How to select the right one among 4590, 4590L and 4590W profiles, please email us. 45 series T-slot aluminium extrusion profile can freely connect with each other.